文章来自于网络，若有侵权请联系删除！shadow213@163.com
一、先从华为网站上下载FAT AP的bin文件
二、准备好本机做为TFTP服务器
三、执行命令
[e8bd-d1f9-7880]ap-mode-switch prepare
Info: Prepare is ok, Use ap-mode-switch command to switch to fat ap.
[e8bd-d1f9-7880]ap-mode-switch check
Info: Ap-mode-switch check ok.
[e8bd-d1f9-7880]ap-mode-switch tftp FatAP3X10XN_V200R005C10SPCa00.bin 169.254.1.2
Info: Preparing to upgrade. Please wait a moment .............
Warning: Do Not Power-off!
.........................................................................................................................................................................
Info: Upgrade upgrade-assistant-package succeeded.
Warning: System will reboot, if you want to switch to upgrade-assistant-package.
Are you sure to execute these operations ? [Y/N]:y
四、重启后
默认密码： admin/admin@huawei.com
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.160 (AP3010DN FAT V200R005C10SPCa00)
Copyright (C) 2011-2015 HUAWEI TECH CO., LTD
Huawei AP3010DN Router uptime is 0 week, 0 day, 5 hours, 25 minutes
MPU 0(Master) : uptime is 0 week, 0 day, 5 hours, 25 minutes
SDRAM Memory Size : 128 M bytes
Flash Memory Size : 32 M bytes
MPU version information :
1. PCB Version : H85D2TD1D200 VER.B
2. MAB Version : 0
3. Board Type : AP3010DN
4. BootROM Version : 223
五、查看AP的IP地址
Huawei>display ip int brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
(E): E-Trunk down
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 0
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 0
Interface IP Address/Mask Physical Protocol
NULL0 unassigned up up(s)
Vlanif1 169.254.1.1/16 up up
六、 主机与AP能直接通信
PING 169.254.1.2: 56 data bytes, press CTRL_C to break
Reply from 169.254.1.2: bytes=56 Sequence=1 ttl=128 time=519 ms
Reply from 169.254.1.2: bytes=56 Sequence=2 ttl=128 time=1 ms
Reply from 169.254.1.2: bytes=56 Sequence=3 ttl=128 time=1 ms
Reply from 169.254.1.2: bytes=56 Sequence=4 ttl=128 time=1 ms
Reply from 169.254.1.2: bytes=56 Sequence=5 ttl=128 time=1 ms
七、 配置AP
使用配置向导进行配置，需要设置
需要设置一个新的配置射频 即2.4G和5G都进行配置。
华为配置向导比较简单，照着一步一步操作即可。